EasyManua.ls Logo

Espressione 8212S - EMPTY SYSTEM FUNCTION; MANUAL RINSING

Espressione 8212S
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. In standby condition, press and hold and strong espresso button for 5 seconds. A beep
sound will be heard with
and strong espresso button will be flashing.
6. Press strong espresso button
to confirm undergoing the self-cleaning process. To resume
back to the standby condition, press
.
7.
will be flashing indicates that the appliance is undergoing the self-cleaning process.
(Caution: Keep skin/body away from the hot water.)
8. When all the water in the water tank is being dispensed out,
and strong espresso button
will be flashing. Remove all the remaining solution in the water tank and fill the tank with
normal tap water until the max position. When water is filled into the water tank,
will
goes off. Then the appliance will continue the self-cleaning process.
9. When the self-cleaning process is completed, the appliance will switch off automatically.
II. EMPTY SYSTEM FUNCTION
The empty system function is recommended to be used before long period of non-use, frost
protection and before talking to repair agent.
1. In standby condition, press and hold the and mild espresso button together for 5
seconds.
2.
will then be flashing.
3.
Remove the water tank from the appliance. will light up stably indicates that the empty
system is under process. You can press
before removing the water tank to resume back to
the standby condition.
4.
When the empty system function is completed, the appliance will switch off automatically
Important: After perform EMPTY SYSYEM FUNCTION; press the hot water button until water can come out
from spout when the coffee maker is reused again.
III. MANUAL RINSING
You can perform a manual rinsing cycle to clean the coffee nozzle after use. It is also suggested to
perform a manual rinsing if the appliance has not been used for a long period of time.
1. In standby condition, p
ress and hold the and hot water button together.
2. The hot water button , strong espresso button and mild espresso button will then
goes off. The coffee nozzle will then dispense a small amount of water which is used for the
rinising.
Danger: Water comes out of the coffee nozzle is hot and is collected in the drip tray underneath.
Avoid contact with splashes of water.

Related product manuals