Espressione 8212S - FURTHER SETTING; ADJUSTING THE VOLUME OF YOUR COFFEE;HOT WATER; GRINDING ADJUSTMENT

15.
Wash the nozzle cover and metal
tube with fresh
water.
16. Assembly the metal tube back to the nozzle cover.
Then push upward to place the nozzle cover back.
And turn it to right to lock it.
VII. Turning Off the machine
Switch off the appliance by pressing the power on/off button.
Unit will go thru cleaning cycle and drain water - place empty cup under nozzle.
VIII. Auto-Shut off
The Appliance is equipped with auto-shut off. Depending on the mode you have selected the
appliance will have different auto-shut off timing (SEE “D. Further Setting – III Mode Selection”).
Unit will go thru cleaning cycle and drain water - place empty cup under nozzle.
D. FURTHER SETTING
I. ADJUSTIING THE VOLUME OF YOUR COFFEE/HOT WATER
You can memorize your desired volume of coffee for both strong espresso and mild espresso and also
the hot water from 0.85 oz to 8.5 oz.
1. When making your coffee (either strong espresso or mild espresso) or dispensi
ng hot water, press
and hold the button you selected. The appliance will continue to make the cup of coffee.
2. When the volume of coffee meets your desired volume, release the button. Two beep sounds
will be heard indicates that the volume of coffee is being memorized.
II. GRINDING ADJUSTMENT
You can adjust the grinder to suit the roast of your coffee by
turning adjuster knob in the bean container:
1. When the grinder is grinding the coffee bean when it is
making the coffee, you can turn the adjust knob to do the
adjustment (CAUTION: Never do the grinding
adjustment
when the grinder is not operating. It may damage the
grinder.)
2. The dots on the adjuster knob indicate the fineness of the
grind, the smaller the dot, the finer the grind