Page 26 PROGRAMMING
ADVANCED PROGRAMMING
CONNECTION
DURATION AFTER
AUTOMATIC
RESPONSE
(INST)
(minutes, from 1 to 9)
DTMF
GENERATOR
(INST)
(from 1 to 9; factory default 2;
DTMF duration=X*50 ms)
MULTI-LINK
FUNCTION
(INST)
(from 0 to 9; 1=master, 0=function disabled)
RELAY
INTERMITTENCE
(INST)
steady-state
intermittent (500 ms ON / 500 ms OFF)
RELAY SETTING
(INST)
same behaviour as outputs AI
same behaviour as outputs AR
active for external power failure
door opener
active as long as the emergency alarm progresses
active as long as the buttons are pressed
active for telephone line absence
active for low battery
LISTEN TO THE
BATTERY LEVEL
(INST)
(expressed in mV)
LISTEN TO THE
EXTERNAL
POWER SUPPLY
LEVEL
(INST)
(expressed in mV)
To Next Page
Loading...
