19
Replacing the Hob Burner Parts
Check that:
• The ignitor is always clean to ensure trouble-free sparking.
• The probe is always clean to ensure correct operation of the safety valves.
Burner Parts Replacing the burner parts
Hob Controls (Gas Taps)
If you have problems with the gas taps, call your Authorised Service Centre.
These parts are NOT user serviceable.
Both the ignitor and probe must be very carefully cleaned using
a toothbrush. When replacing the burner parts, ensure you do not
damage the ignitor or temperature probes.
* All images are for indication only; please refer to your individual unit for actual item.
To Next Page
Loading...
Need help?
General
