202207V1.1
info@estarpower.com
www.estarpower.com
6.Decommissions
6.1Decommissions
Disconnect the inverter from DC input and AC output; remove all connection cable from the Microinverter;
remove the Microinverter from the frame.
Please pack the Microinverter with the original packaging, or use the carton box that can afford 5kg weight
and can be fully closed if the original packaging is no longer available.
6.2Storage and Transportation
HERF packages and protects individual components using suitable means to make the transport and
subsequent handling easier. Transportation of the equipment, especially by road, must be carried out by
suitable ways for protecting the components (in particular, the electronic components) from violent, shocks,
humidity, vibration, etc. Please dispose the packaging elements in appropriate ways to avoid unforeseen
injury.
It is the customer’s responsibility to examine the condition of the components transported. Once receiving
the Microinverter, it is necessary to check the container for any external damage and verify receipt of all items.
Call the delivering carrier immediately if damage or shortage is detected. If inspection reveals damage to the
inverter, contact the supplier, or authorized distributor for a repair/return determination and instructions
regarding the process.
The microinverter storage temperature is -40-85℃.
6.3Disposal
If the equipment is not used immediately or is stored for long periods, check that it is correctly packed. The
To Next Page
Loading...