202207V1.1
info@estarpower.com
www.estarpower.com
DO NOT attempt to repair the Microinverter. If it fails, contact technical support to obtain an RMA number and
start the replacement process. Damaging or opening the Microinverter will void the warranty.
Caution!
The external protective earthing conductor is connected to the inverter protective earthing terminal through AC
connector.
When connecting, connect the AC connector first to ensure the inverter earthing then do the DC connections.
When disconnecting, disconnect the AC by opening the branch circuit breaker first but maintain the protective
earthing conductor in the branch circuit breaker connect to the inverter, then disconnect the DC inputs.
In any circumstance, do not connect DC input when AC connector is unplugged.
Please install isolation switching devices on the AC side of the inverter.
1.2Radio Interference Statement
CE EMC Compliance：The equipment can comply with CE EMC, which are designed to protect against harmful
interference in a residential installation. The equipment could radiate radio frequency energy and this might cause
harmful interference to radio communications if not following the instructions when installing
and using the equipment. But there is no guarantee that interference will not occur in a particular installation. If
this equipment causes harmful interference to radio or television reception, the following measures might resolve
the issues:
A) Relocate the receiving antenna and keep it well away from the equipment.
B) Consult the dealer or an experienced radio / TV technical for help. Changes or modifications not expressly
approved by the party responsible for compliance may void the user's authority to operate the equipment.
To Next Page
Loading...