202207V1.1
info@estarpower.com
www.estarpower.com
3.About Function
3.1Work Mode
Normal: Under this mode, Microinverter is operating normally and convert DC power into AC power to support
the house loads and feed in to Public Grid.
Zero Export Control: Under this mode Microinverter’s generation is limit base on the current house loads, there
will be no extra power feed in to the Public Grid.
Stand by: There are several circumstances that Microinverter will stay in Standby mode:
The current condition is contradicted with Microinverter operating requirement.
No house loads or the Export control value has been set as “0” on the DCU under the Zero Export Control
mode.
To Next Page
Loading...