202207V1.1
info@estarpower.com
www.estarpower.com
1.Important Safety Instructions
This manual contains important instructions to follow during installation and of the Photovoltaic Grid-connected
Inverter (Microinverter). To reduce the risk of electrical shock and ensure the safe installation and operation of
the Microinverter, the following symbols appear throughout this document to indicate dangerous conditions and
important safety instructions.
Specifications subject to change without notice - please ensure you are using the latest manual found at the
manufacturer website.
WARNING: This indicates a situation where failure to follow instructions may cause a serious hardware failure or
personnel danger if not applied appropriately. Use extreme caution when performing this task.
*Note: This indicates information that is important for optimized microinverter operation. Follow these
instructions strictly.
1.1Safety Instructions
DO NOT disconnect the PV module from the Microinverter without disconnecting the AC power.
Only qualified professionals should install and/or replace the Microinverters.
Perform all electrical installations in accordance with local electrical codes.
Before installing or using the Microinverter, please read all instructions and cautionary markings in the
technical documents and on the Microinverter system and the Microinverter solar-array.
Be aware that the body of the Microinverter is the heat sink and can reach a temperature of 80℃ . To reduce
risk of burns, do not touch the body of the Microinverter.
To Next Page
Loading...