Estella 348SM30 - PARTS DIAGRAM

5.
CLEANING
1. Remove the mixer bowl and any attachments. (diagram below)
2. Wash mixer bowl and attachments with soap and warm water.
3. Rinse thoroughly and dry.
NOTE: Cleaning should be done at the end of every work day and when switching between batches
of product.
1. Unscrew those three
pcs M8 hexagon socket
bolts and remove the
auxiliary rod.
2. Unscrew these
three pcs M10 outer
hexagonal bolts and
remove the dough hook.
3. Unscrew these
six pcs M8 outer
hexagonal bolts and
take off the bowl.
REMOVING THE ATTACHMENTS