TROUBLESHOOTING
Issue Cause Solution
The axles can't work when
operating the machine
Poor contact of the electrical
equipment
Check that the plug is securely
tted into the outlet
The mixing bowl is out of
position
Moving direction is not correct
Check to see that everything is
aligned correctly
Leaks oil Sealing washer is damaged Replace the sealing washer
Difcult to move the bowl
up and down
Slideway is dirty or rusted Clean and lubricate the slideway
The motor is overheated
and the speed is down
The voltage is not high enough, or
the incorrect speed is set for the
thickness of dough
Check the voltage or use a
lower speed
Noisy and overheating Poor lubrication
Add or change lubrication to
moving parts
Mixer touches bowl
The mixing device or bowl is
deformed
Repair or change the bowl or
mixing device
8.
To Next Page
Loading...
