Esun eBOX - Method of Use; Connecting Power Adapter; Starting and Clearing Weight; Adding Desiccant and Spool

3
/ 7
Spool
Method of Use
1. Plug the adapter into the AC100-240V ~ 50 / 60Hz power supply and plug the output terminal into the interface in
the tail of eBOX.
2. Press button to start, the weight will be automatically cleared. Then enter the WOC mode to set the plate
weight. More details, refer to "Weight Setting Mode"
3. Open the upper cover, put the desiccant into the empty slot in the rear of the box, then put the spool in.
Desiccant