Esun eBOX - Parameter Setting Suggestions; Other Notes

7
/ 7
Parameter Setting Suggestion
Level Set Reference Table
Type of filament
PLA/PLA+
ABS/ABS+
PETG
PVA
Nylon
PC
Level
1
2
2
3
4
4
Level Set for Temperature & Humidity Reference Table
Note: Above parameters in the table are testing under 20 ℃ of temperature and 62% of humidity in the room. The te
mperature and humidity in the box will slightly change due to different environments.
Spool Weight Reference Table
Spool
description
eSUN transparent
spool of 1kg
eSUN black spool
of 1kg
eSUN transparent
spool of 0.5kg
eSUN black spool
of 0.5kg
Dupont
transparent spool
of 1kg
weight
220g
230g
203g
212g
360g
Note: The above weight is only the weight of some spools, the weight of other spool please consult the filaments
distributor.
Other Notes
■ The desiccant in the filaments package can be used to dry.
■ Do not open the box in case of the loss of temperature when dry filaments.
Level
1
2
3
4
Hot plate TEMP
50℃
60℃
70℃
80℃
Inside TEMP
36℃
40℃
45℃
50℃
Inside humidity
30%
28%
24%
15%