Esun eBOX User Manual

User Guide
Please read the user guide before use and keep it carefully.

Esun eBOX Specifications

General

Max Spool Size	200mm diameter, 73mm width
Power	AC100-240V~50/60Hz
Weighing Range	up to 2kg
Weighing Accuracy	0.02KG
Filament Compatibility	PLA, ABS, PETG

Summary

General Safety Warnings

Usage Instructions and Disclaimers

Product Components Overview

Method of Use

Connecting Power Adapter

Plugging the adapter into the power supply and connecting to the eBOX.

Starting and Clearing Weight

Pressing the button to start and automatically clear the weight.

Adding Desiccant and Spool

Placing desiccant in the rear slot and then inserting the filament spool.

Loading Filament

Parameter Setting

Understanding Buttons and Modes

Overview of the four buttons and five operational modes.

System Dormancy and Wake-up

How the system enters dormancy and how to wake it up.

Gram Mode Operation

Pound Mode Operation

Weight Setting Mode

Setting Empty Plate Weight

Adjusting the empty plate weight in WOC mode.

Temperature Setting Mode

Adjusting Temperature Levels

Setting temperature levels for optimal drying conditions.

Heating Time Setting Mode

Setting Heating Duration

Configuring the heating time in hours and half-hours.

Parameter Setting Suggestions

Other Notes