Need help?Do you have a question about the ESX SX-5800 SIGNUM SERIES and is the answer not in the manual?
Instructions for marking mounting holes, drilling, and securing the amplifier unit.
Details on grounding, remote turn-on, battery connection, and fuse requirements.
Explanation of the Power (green) and Protect (red) LED indicators and their meanings.
Details on Low Pass, Bass EQ, and Subsonic Filter controls for Channel 5.
Information on the mode switch and input sensitivity level adjustment.
Description of the remote connection for adjustment and RCA inputs for audio signal.
Guide for connecting speakers in stereo mode for a 5-channel system.
Explanation of X-Over, Subwoofer, Bass EQ, Subsonic Filter, Level, and Mode settings.
Instructions for connecting speakers in a 3-channel configuration with mono subwoofer.
Details on X-Over, Subwoofer, Bass EQ, and Level settings for 3-channel mode.
Guidance on diagnosing problems when the system does not turn on.
Steps to troubleshoot noise, white noise, no signal, or low output issues.
Explanation of the amplifier's protection mode and causes like overheating or shorts.
Methods for identifying and resolving electrical interference and engine RPM-related noises.
Technical details on output power ratings, frequency response, and damping factor.
Specifications for signal-to-noise ratio, channel separation, THD&N, and input gain.
Details on crossover type, variable highpass/lowpass frequencies, Bass Boost, and Subsonic Filter.
Information on bass remote control, heatsink size, and overall amplifier dimensions.
To Next Page
General
