Need help?Do you have a question about the ESX vision2 Series and is the answer not in the manual?
Wiring and configuration for 2-speaker stereo setup.
Wiring and configuration for 1-subwoofer mono setup.
Wiring and configuration for 4-speaker stereo setup.
Wiring and configuration for 3-channel setup.
Wiring and configuration for 2-subwoofer mono setup.
General| Channels | 2 |
|---|---|
| Signal-to-Noise Ratio | > 90 dB |
| Low Pass Filter | 50 Hz - 250 Hz |
| Bass Boost | 0 - 12 dB |
| Operating Voltage | 10 V - 16 V |
| Input Sensitivity | 0.2V - 6V |
To Next Page
