Need help?Do you have a question about the eta TWIN and is the answer not in the manual?
Details copyright ownership and usage restrictions.
Company reserves right to make technical modifications without prior notice.
Notes potential software version differences and points to update sources.
Explains safety symbols and instruction layout for safe operation.
Outlines the step-by-step process for configuring the heating system using the wizard.
Describes the interface for selecting and managing function blocks in the configuration wizard.
Details viewing and adjusting settings for individual function blocks.
Explains viewing and defining connections between heating system components.
Shows terminal assignments and how to modify them for electrical connections.
Describes applying configured settings and restarting the system.
Explains accessing higher service levels for parameter modification.
Details manually switching components on/off for function checks.
Guides changing electrical terminal assignments for system components.
Demonstrates checking operational status and direction of components like mixing valves.
Describes the process of saving current system settings, parameters, and allocations to prevent data loss.
Explains how to load previously saved configurations from internal storage or a USB stick.
Illustrates a typical heating system configuration with solar thermal energy.
Details solar heating configuration with a stratified charging module for buffer tanks.
Outlines steps for continuing and completing heating system setup and testing.
Describes TWIN pellet burner parameters, including idle times and ash box reminders.
Explains log boiler settings, including auxiliary boiler interaction and heat exchanger cleaning.
Details buffer settings for log boilers with TWIN pellet burners, including temperatures.
Covers hot water tank parameters, including switch-on/off points and solar charging.
Explains heating circuit settings, including flow temperature, heating curves, and room sensor integration.
Details solar system parameters, including pump speeds and collector temperature differences.
Describes fresh water module settings, including venting, circulation, and flow control.
Covers pellet store parameters, including conveying system type and current limits.
Explains pellet store parameters with switch units, focusing on suction operation and head switching.
To Next Page
General