ETAS 2 Configuration Creation
When you use the Bus Trace add-on, click in the configuration ribbon and
enter the following information in the displayed dialogue:
l
BLF file with the recorded bus data
l
DBC or ARXML file containing the CAN Bus description
l
CAN Bus ID (for DBC) or CAN Bus (for ARXML)
The input files are combined to an AFF (Associated File Format) file shown as
entry in the File Explorer. The trace file contents are interpreted as defined in
the CAN monitoring description file and can be used as ordinary signals from
measure files.
MDA V8.6 – User Guide 44
To Next Page