Need help?Do you have a question about the Etatron DLXB pH-RX-CL Series and is the answer not in the manual?
General| Power supply | 100-240V AC 50/60Hz |
|---|---|
| Enclosure | IP65 |
| Mounting | Wall mounting |
| Display | LCD |
| Measurement | pH, ORP (Redox), Chlorine |
| Inputs | level probe, Flow sensor, pH/ORP/Cl probe |
| Outputs | 4-20 mA |
Important safety information regarding installation, use, and maintenance.
Identification of hazards associated with the pump and its operation.
Precautions for dosing toxic or dangerous liquids and fume exposure.
Guide for installing the injection valve correctly.
Overview of default parameters and available functions.
Initial setup for selecting measurement parameter (pH, Redox, Chlorine).
Choosing the measurement parameter for pump control.
Step-by-step guide for calibrating pH and Redox measurements.
Procedure for calibrating chlorine measurements.
How to define the target value for pump operation.
Configuring maximum dosing speed based on measurement value.
Setting hysteresis for stable operation around the setpoint.
Steps for resetting pump parameters to default settings, saving calibration.
Steps for resetting all parameters and calibration to default.
Identifying and resolving common mechanical issues with the pump.
To Next Page
