Need help?Do you have a question about the Etatron DLX-MF/M and is the answer not in the manual?
General| Enclosure Material | PP reinforced with fiberglass |
|---|---|
| Protection Degree | IP65 |
| Control Modes | Manual, Automatic |
| Voltage | 230V |
| Frequency | 50/60 Hz |
| Flow Rate | Up to 20 L/h |
| Pressure | Up to 20 bar |
| Stroke Rate | Up to 300 strokes/min |
| Power Supply | 230V AC |
| Maximum Head | 20 bar |
| Material | PVDF, PTFE |
| Inlet/Outlet Size | 4x6 mm |
Intervention or repair to internal parts must be done by qualified personnel.
Use the pump only for its intended purpose to avoid danger.
Precautions for unpacking, power supply, and general electrical equipment use.
Requirements for placement, environment, electrical connections, and hose routing.
Instructions for connecting suction and discharge hoses to the pump nipples.
Addresses issues like loss of liquid, loose tube nuts, or broken membranes.
Covers faults like display off, pump not operational, or pulses not constant.
To Next Page
