ETC Service Note
Congo™ jr v4.3 I/O Software Code Installation
Congo™ jr v4.3 I/O Software Code Installation Page 55 Electronic Theatre Controls, Inc.
Step 13: Wait until the window displays "Please load Firmware File"
Note: It may take up to 10 seconds for this message to be displayed
Step 14: Click on the File button
Step 15: Browse to the USB Flash Drive's software folder
Step 16: Select the file labeled" CNGOJRIO_v1_0_0_9_0_026.src
Step 17: Click the Open button
To Next Page
Loading...