EasyManuals Logo

Etel DSCDM User Manual

Default Icon
370 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #265 background imageLoading...
Page #265 background image
ETEL Doc. - Operation & Software Manual # DSC2P 903 / Ver. F / 3/6/05 Chapter E: Appendixes
Operation & Software Manual
Direct Drives & Systems 265
15.34 XAC, IGE, ILE example
:10.2 ;Label 10
X10.2=0 ;Sets user’s variable X10 of axis 2 to 0
:20.2 ;Label 20
XAC.2=X10.2 ;Copies the value of the user’s variable X10 of the axis 2 in the accumulator (XAC)
ILE.2=5,30 ;Goes to label 30 if XAC ≤ 5
IGE.2=10,50 ;Goes to label 50 if XAC ≥ 10
X10.2+=1 ;Adds 1 to the previous value of the user’s variable X10 of the axis 2
WTT.2=1.0 ;Waits for 1 (ISO unit)
JMP.2=20 ;Jumps to label 20
:30.2 ;Label 30
X20.2=1 ;Sets user’s variable X20 of axis 2 to 1
WTT.2=0.1 ;Waits for 0.1 (ISO unit)
X20.2=0 ;Sets user’s variable X20 of axis 2 to 0
WTT.2=0.1 ;Waits for 0.1 (ISO unit)
X10.2+=1 ;Adds 1 to the previous value of the user’s variable X10 of the axis 2
JMP.2=20 ;Jumps to label 20
:50.2 ;Label 50
X20.2=4 ;Sets user’s variable X20 of axis 2 to 4
WTT.2=2.0 ;Waits for 2 (ISO unit)
X20.2=0 ;Sets user’s variable X20 of axis 2 to 0
WTT.2=2.0 ;Waits for 2 (ISO unit)
X10.2+=2 ;Adds 2 to the previous value of the user’s variable X10 of the axis 2
JMP.2=20 ;Jumps to label 20

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Etel DSCDM and is the answer not in the manual?

Etel DSCDM Specifications

General IconGeneral
BrandEtel
ModelDSCDM
CategoryController
LanguageEnglish

Related product manuals