EasyManua.ls Logo

Etesia MKHE3 - User Manual

Etesia MKHE3
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MBHE2-MKHP3-MKHP5-MHHE2-
MKHE3-MKM-MKHPF
GB
Original user
manual
Please read carefully before using your machine

Questions and Answers

  • A
    Amber FranklinAug 29, 2025
    How to move Etesia Lawn Mower with engine off?
    • A
      Angela WhiteAug 29, 2025
      To move your Etesia Lawn Mower when it's broken down, consider the following: * For long distances, use a trailer or goods vehicle. * Use the by-pass feature to move the mower without the engine. * Position the lever to [0] for an unclutched position. * When transporting, secure with straps around the strap hooks. * Engage the parking brake. * Stop the engine and remove the ignition key. * Close the petrol tap and block the wheels.
  • K
    kfieldsNov 9, 2025
    How to remove rear wheel on Etesia Lawn Mower?
    • J
      John WilkinsonNov 9, 2025
      To remove a rear wheel on your Etesia Lawn Mower, follow these steps: 1. Stop the engine and remove the contactor key. 2. Apply the parking brake. 3. Secure the vehicle using chocks. 4. Place a jack under the rear part of the chassis on the side where the wheel needs to be replaced and lift until this wheel does not touch the ground anymore. 5. Secure the machine by lying it on stable props. 6. Remove the wheel hub. 7. Unscrew the 3 screws with a key. 8. Remove sidewards the two securing rings. 9. You can now remove the wheel from the shaft. For remounting, follow the same instructions in the opposite way. Grease the wheel shaft and ensure you do not lose the O shape key which fits in the wheel shaft. Check the screw tightness and the tyre pressure. Front pressure: 1.5 bar for M...
  • A
    Andrew FarleyNov 17, 2025
    How to change rear tires on Etesia Lawn Mower?
    • A
      Alexandra YoungNov 17, 2025
      To change the rear wheels on your Etesia Lawn Mower, follow these steps: 1. Stop the engine and remove the contactor key. 2. Apply the parking brake. 3. Secure the vehicle using chocks. 4. Remove the wheel hub. 5. Unscrew the 3 screws with a key 6 (thread 5). Remove sidewards the two securing rings. 6. Place a jack under the rear part of the chassis on the side where the wheel needs to be replaced and lift until this wheel does not touch the ground anymore. 7. Secure the machine by lying it on stable props. 8. Remove the wheel from the shaft. 9. For remounting, follow the same instructions in the opposite way. Do grease the wheel shaft. 10. Check the screw tightness. 11. Check the tyre pressure. Front pressure: 1.5 bar for MKHP models 1.2 bar for other models Rear pressure: 0.8 b...

Summary

1. YOUR SAFETY AND THAT OF OTHERS

2. KEY TO DIAGRAMS - SAFETY

SAFETY LABELS

Detailed descriptions of safety symbols and their meanings on the mower.

2. KEY TO DIAGRAMS - USE

H - STARTING THE ENGINE

Steps for starting the mower's engine.

J - OPERATING THE CUTTER

How to engage and disengage the cutting deck.

6. TECHNICAL SPECIFICATIONS

7. OPERATING INSTRUCTIONS

FUEL HANDLING

Safe procedures for refueling the mower.

STARTING AND STOPPING THE ENGINE

Step-by-step guide for starting and stopping the engine.

STARTING AND STOPPING THE CUTTER

STARTING THE CUTTER

How to engage the cutting deck.

STOPPING THE CUTTER

How to disengage the cutting deck.

DRIVING THE MOWER

DRIVING ON SLOPING GROUND

8. ASSEMBLY - DISASSEMBLY - ACCESS TO COMPONENTS

9• MAINTENANCE

CUTTER (BLADE) CONDITION

Inspecting the blade for wear and damage.

REPLACEMENT OF THE CUTTER (BLADE)

Steps for replacing the mower blade.

ENGINE MAINTENANCE

CHECKING THE OIL LEVEL

How to check engine oil level.

REPLACEMENT OF THE OIL FILTER

TRANSMISSION MAINTENANCE

10. MAINTENANCE SCHEDULE

11. PROLONGED STORAGE - WINTER STORAGE

12. TROUBLESHOOTING

14. WARRANTY

Etesia MKHE3 Specifications

General IconGeneral
BrandEtesia
ModelMKHE3
CategoryLawn Mower
LanguageEnglish

Related product manuals