Etesia MKHP3 - User Manual

38 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

MBHE2-MKHP3-MKHP5-MHHE2-

MKHE3-MKM-MKHPF

GB

Original user

manual

Please read carefully before using your machine

Table of Contents

Questions and Answers

W
Wendy NormanAug 29, 2025
How to move Etesia Lawn Mower with engine off?
- P
  parkerpaulAug 29, 2025
  To move your Etesia Lawn Mower when it's broken down, consider the following: * For long distances, use a trailer or goods vehicle. * Use the by-pass feature to move the mower without the engine. * Position the lever to [0] for an unclutched position. * When transporting, secure with straps around the strap hooks. * Engage the parking brake. * Stop the engine and remove the ignition key. * Close the petrol tap and block the wheels.
J
Jeanette SmithNov 9, 2025
How to remove rear wheel on Etesia Lawn Mower?
- E
  Ethan SmithNov 9, 2025
  To remove a rear wheel on your Etesia Lawn Mower, follow these steps: 1. Stop the engine and remove the contactor key. 2. Apply the parking brake. 3. Secure the vehicle using chocks. 4. Place a jack under the rear part of the chassis on the side where the wheel needs to be replaced and lift until this wheel does not touch the ground anymore. 5. Secure the machine by lying it on stable props. 6. Remove the wheel hub. 7. Unscrew the 3 screws with a key. 8. Remove sidewards the two securing rings. 9. You can now remove the wheel from the shaft. For remounting, follow the same instructions in the opposite way. Grease the wheel shaft and ensure you do not lose the O shape key which fits in the wheel shaft. Check the screw tightness and the tyre pressure. Front pressure: 1.5 bar for M...
N
Nancy DavisNov 18, 2025
How to change rear tires on Etesia MKHP3 Lawn Mower?
- C
  courtneyhowardNov 18, 2025
  To change the rear wheels on your Etesia Lawn Mower, follow these steps: 1. Stop the engine and remove the contactor key. 2. Apply the parking brake. 3. Secure the vehicle using chocks. 4. Remove the wheel hub. 5. Unscrew the 3 screws with a key 6 (thread 5). Remove sidewards the two securing rings. 6. Place a jack under the rear part of the chassis on the side where the wheel needs to be replaced and lift until this wheel does not touch the ground anymore. 7. Secure the machine by lying it on stable props. 8. Remove the wheel from the shaft. 9. For remounting, follow the same instructions in the opposite way. Do grease the wheel shaft. 10. Check the screw tightness. 11. Check the tyre pressure. Front pressure: 1.5 bar for MKHP models 1.2 bar for other models Rear pressure: 0.8 b...

Summary

Safety and User Protection

Safety Diagram Keys

Engine Operation Safety

Specific Safety Label Meanings

Operational Diagram Keys

Engine Start-Up Procedure

Mow in Reverse Function

Cutter Engagement and Disengagement

Machine Overview and Components

Machine Technical Specifications

Operating the Ride-On Mower

Pre-Delivery Inspection Checklist

Mower Safety System Overview

Description of the mower's built-in safety switches and their functions.

Fuel Handling and Safety

Engine Start-Up and Shutdown

Step-by-step guide for starting and stopping the mower's engine safely.

Cutter Operation Procedures

How to engage and disengage the cutting deck and its associated functions.

Mower Driving Instructions

Guidance on driving the mower, including parking brake and forward controls.

Adjusting Cutting Height

Mowing Techniques and Tips

Best practices for mowing, including grass collection and high grass management.

Safe Operation on Slopes

Precautions and techniques for operating the mower on inclines.

Model-Specific Features

Assembly and Component Access

Accessing the Engine Compartment

Cutter Removal and Installation

Grass Box Removal Procedure

Routine Maintenance and Care

General Cleaning Procedures

Cutter Housing Cleaning

Cutter Blade Maintenance

Checks and maintenance for the cutter blade's condition, sharpness, and balance.

Replacing the Cutter Blade

Step-by-step guide for replacing the mower's cutting blade.

Engine Maintenance Procedures

Essential maintenance tasks for the mower's engine, including oil and filters.

Replacing the Engine Oil Filter

Instructions for changing the engine oil filter at specified intervals.

Spark Plug Maintenance and Replacement

How to clean, gap, and replace the spark plug for engine performance.

Air Filter Cleaning and Replacement

Procedure for cleaning or replacing the air filter to maintain engine efficiency.

Petrol Filter Replacement

Cooling System Maintenance

Transmission System Maintenance

Maintenance tasks for the hydrostatic gearbox and related components.

Hydrostatic Gearbox Care

Hydraulic Oil Level Check

Battery Maintenance and Care

Procedures for maintaining the mower's lead-acid battery, including charging.

Routine Battery Care

Battery Charging Instructions

Tyre Maintenance and Pressure

Maintenance Schedule Overview

Storage and Winterization

Winter Storage Preparation

Returning Mower to Service

Troubleshooting Common Issues

Moving Mower Without Engine

How to move the mower when the engine is not running using the bypass.

Towing a Broken-Down Mower

Instructions and precautions for towing the mower in case of breakdown.

Safe Mower Transport

Changing Mower Tyres

Step-by-step guide for safely removing and replacing mower wheels.

Product Warranty Information

General Warranty Terms

ETESIA Contractual Warranty

Details on ETESIA's specific contractual warranty coverage and duration.

Etesia MKHP3 Specifications

General

Brand	Etesia
Model	MKHP3
Category	Lawn Mower
Language	English

Related product manuals

Etesia Bahia MKHP

Etesia Bahia MKHE

Preview: Etesia MKEHH

Preview: Etesia MVEHH

Preview: Etesia ME53B

Preview: Etesia MBHE2

Preview: Etesia Bahia MBHE

Etesia Bahia MBHE

Etesia Bahia MHHE

Preview: Etesia ET MOWER ETM105

Etesia ET MOWER ETM105

Preview: Etesia AV95