KL6600
setting temperature. And it will not start to heat at the second filter cycle.
2.5 The 4th time to press “ ”, the system enters to “Filter Mode”, the LED shows “ ”.
***Note***
When A2=ON, there is without “Economy Mode” and it will auto ignore the fourth step when
operation.
Ⅴ).Clock setting
At clock setting status, (show as Fig. 4), press “ ” to set the hour (down button), the
adjusting range is from “0 to 23”.And to press the “ ” to set the minute (up button), the
adjusting range is from “0 to 59”
Fig. 3: Current time 12:34 Fig.4: Start time of filtration at 3:00.
Ⅵ).Pre-settings filtering antivirus cycle (Valid of A1=off)
1. It has twice filtering antivirus cycle every day. But it is only able to set the start time for the first
filtering antivirus cycle. And the second filtering cycle is automatically added, it will starts after
12 hours later. (For example, it starts at 14:00 and the start time of the second filtering is at
2:00)
2. When A3 = ON, the time for filtering antivirus is fixed. It starts to work at 14:00 every day, and it
lasts for 3 hours. And the start time of the second filtering is at 2:00.
3. When A3= OFF, at setup status of “start time of filtering cycle” (Fig.4).Press “ ” to change
starting time, and both hour and minute are 00.
4. At setup status of “continuous working time of filtering cycle”, press “ ” to change the
time, the settings are 1-11 hours, and the default time is 3 hours (Fig. 5).
Fig. 5: filtering lasts for 3 hours Fig. 6: Temperature Adjust
To Next Page
Loading...
Need help?
General
