Need help?Do you have a question about the ETHINK KL8-3A and is the answer not in the manual?
General| Brand | ETHINK |
|---|---|
| Model | KL8-3A |
| Category | Control Panel |
| Language | English |
Details the functions of various buttons on the control panel, including heating, pumps, and radio operations.
Describes the initial display, standby status, and how to switch between ON and STANDBY modes.
Details how to activate, use, and disable the keypad lock feature for security.
Explains how to control the spa lights, including turning them on/off and changing colors.
Covers the process of setting up and managing the preheating function for the spa water.
Describes how to set up and manage long circulation and specified period circulation cleaning cycles.
Explains how the system prevents freezing by automatically activating the heater and circulation pump below a certain temperature.
Guides users on how to set the system's clock, including adjusting hours and minutes.
Explains the step-by-step process for setting up circulation filtration, including start and duration times.
Outlines the procedure for setting the preheating function, including start time and duration.
Describes how to switch the temperature display between Celsius and Fahrenheit using the control panel.
Explains how to set the desired water temperature for the spa.
Details how to turn on and off the spa's jet pumps and circulation pump.
Describes the operation of the heater, including thermostatic control and safety shut-offs.
Explains how to control the spa's blower function.
Guides users on operating the radio and CD/AUX input, including tuning and saving channels.
Illustrates the process of saving and removing radio channels on the control panel.
Details the function of each DIP switch on banks A and B for system configuration.
Explains that 'E1' indicates a temperature sensor issue, such as being short or open.
Indicates that the system has detected the heater temperature reaching or exceeding 48°C.
Lists key performance metrics like working voltage, waterproof level, and heater/pump/blower ratings.
Details the maximum load capacities for the heater, jet pumps, circulation pump, blower, LED light, ozone, and radio.
Shows wiring diagrams for the heater, pumps, blower, and other components, illustrating connection points.
Lists the standard wire colors used for connecting various loads like pumps, blowers, and lights.
Details the correct installation, flow direction, and specifications for the H220 heater model.
Covers the installation, flow direction, and specifications for the H380 heater, including element configuration.
Lists the ideal ranges for sanitiser, pH, total alkalinity, and calcium hardness, along with testing frequency.
Recommends specific chemical products like Lithium Hypochlorite and advises against others like bromine tablets or salt chlorination.
Specifies the 2-year warranty against manufacturing defects and lists exclusions like physical damage or improper installation.
Includes important safety notes regarding appliance usage by individuals with reduced capabilities and the requirement for an RCD.
To Next Page
