ETHINK KL6600 User Manual

KL6600
www
.ethink
-
spa.com
1
The Manual of KL6600
Ⅰ. Overview of the Panels
Fig. 1.The plan of panel
AUX
Fig. 2.The installation plan of sever buttons（156*72mm）
Ⅱ.The function summary
1. Three working modes: Normal Mode, Economy Mode and Filter Mode.
2. Plug-and-play mode is to get easy operation and easy installation.
3. 24 hours clock display and setup of circulation-cleaning
4. Max 3KW of the heater, water temperature display and the setting function.
5. 1 surfing pump and 1 blower and an additional load AUX output
6. 1 impact massage pump, divide into ordinary impact and strong impact.
7. Synchronous changing or fixed color with multiple lights and ozone antivirus system.

ETHINK KL6600 Specifications

General

Brand	ETHINK
Model	KL6600
Category	Control Panel
Language	English

Summary

I. Overview of the Panels

II. The function summary

III. Function Description

I ).Initial electrical testing

Details voltage detection, input transformer testing, and normal/over-voltage conditions.

II). Temperature Setup (77-104°F/25-40℃)

Explains how to enter and adjust temperature settings via buttons.

III). The Operation of “ M ”

Describes pressing and holding the 'M' button to enter setting mode and clock setting.

IV). Working Mode

V).Clock setting

VI). Pre-settings filtering antivirus cycle (Valid of A1=off)

VII).Temperature Adjust:

VIII).The Main Board Specifications and DIP jumpers settings (Fig.7)

IV. The operating instructions of high-voltage load

I). The operation of surfing pump

Instructions for operating the surfing pump ON/OFF, with auto-shutoff after 15 mins.

II).The operation of the Blower

Instructions for operating the blower ON/OFF, with auto-shutoff after 15 mins.

III) The operation of the Light

Instructions for operating the light ON/OFF, with auto-shutoff after 120 mins.

IV).The operation of AUX

V) Automatically anti-freeze (It is effective when working with heater)

VI). The operation of auto moisturizing (B3=ON):

V.Installation structure

VI. System malfunction warning

VII.Electrical parameters

1. Performance index

Details working voltage, current, compression strength, insulation resistance, waterproof level, and shock prevention.

2. Maximum output load index

Lists output load specifications for heater, blower, light, surfing pump, circulating pump, and AUX.