eTIGER ES-CAM2A - Smartphone Connection; Connect to Camera Wi-Fi; Launch iSecurity+ App

3
Connect your smartphone to the camera
iOS Android
Go to the Wi-Fi
settings of your
smartphone,
select the network
“ES-CAM2A XXXX”
(the last 4 gures
represent the last 4
gures of the MAC
ID at the back of
your camera).
Launch the app iSecurity+
iOS Android
Once the
connection
has been made
(after around
30 seconds),
launch iSecurity+.
iSecurity+ detects
automatically your
camera.
Select ‘Yes’ to start
the setup of your
camera.