General information
The signal of the ES-S7A is transmitted by radio-
frequency, which makes its installation easier.
Several ES-S7A can be installed in dierent indoor
locations to deter illegal intrusions. Several ES-
S7A can be registered in the control panel of your
alarm system. When your alarm system detects an
intrusion, the ES-S7A rings out and its strobe lights
turn on.
The ES-S7A can also be used as a standalone alarm
system by registering wireless accessories in the
siren.
Layout
Tamper switch
Siren
Power switch
Connect button
Strobe light
To Next Page
Loading...
