Clear all accessories
It is recommended to clear every accessory from
the siren if you were to lose one of them, especially
if you have lost your remote control.
Regardless the system is armed or disarmed, press
and hold the Connect button until you hear 3
beeps (7 seconds): all accessories or contol panels
connected have been cleared from the siren. To use
the siren again, register wireless accessories in the
siren again.
Specications
Power supply
Input: AC 110V
~ 220V/50-60Hz
Output: DC 12V/800mA
Static current
< 2mA
Alarm current
< 300mA
Volume
100dB
Radio frequency
433MHz (±75KHz)
Housing material
ABS plastic
Operating conditions
Temperature: -10°C ~ +55°C
Relative Humidity: ≤80%
(non-condensing)
Dimensions
145 x 74.5 x 38 mm
To Next Page
Loading...
