GB 21
Attention!
Never use the dishwasher without the filter system. Incorrect fitting
of the filter system will result in the dishwasher no longer delivering
maximum performance. Damage to cutlery and dishes is a further
possible consequence
Cleaning the spray arm
It is essential that you clean the spray arm on a regular basis. In the
longer term, waste can block the nozzles and the bearings in the spray
arm. Clean the spray arm as follows:
• Unscrew the nut so that you can remove the washer.
• Next remove the spray arm.
• Clean the spray arm in warm, soapy water, using a soft brush to
clean the nozzles.
• Rinse the spray arm thoroughly before fixing back in place.
Cleaning the door
Clean the edge of the door, including the sealing rubber, with a soft,
damp cloth. Take care to ensure that water does not enter the door
locking mechanism or electrical components.
Warning!
Never use a spray cleaner to clean the door panel for it could damage
the door lock and electrical components. Also, never use abrasive
cleaners or scouring pads on the outer surfaces because they will
scratch the finish. Some papers towels can also scratch or leave marks
on the surface.
How to keep your dishwasher in shape
After every wash
After every wash, turn off the water supply to the appliance and leave
the door slightly ajar so that moisture and odors are not trapped inside.
Remove the plug
Before cleaning or performing maintenance, always remove the plug
from the socket. Do not run risks.
MAINTENANCE
To Next Page
Loading...
