ETNA LP 14 - Filling the Containers Inside the Machine; Filling Coffee Container

8
© ETNA Vending Technologies b.v.
Instruction for use LP 14
4.4.2 Filling the containers inside the
machine
1. Open the machine door.
2. Lift the upper lid.
3. Remove the cover from the container and
fill it with the desired ingredient. Ensure that
the correct ingredients are placed in the
containers intended for them.
4. Replace the cover on the container and
shut the upper lid.
➭
Place a cup under the
distribution nozzle.
Press the selection
button for the product
concerned a few times
until the dosing case is
completely filled.
4.4.3 Filling coffee container
1. Open the machine door.
2. Remove the bean reservoir cover using the
key.
3. Fill with coffee beans. The coffee reservoir
has a capacity of approx. 1 kg (2.2 lbs) of
beans.
4. Close the coffee bean reservoir.
5. Close the door.