ZONEGUARD+ OWNER’S MANUAL
6
Battery
Compartment
RECEPTION TEST
After powering the module, press the <TEST> button
(located on the left side of the base unit). If the module
beeps, it is receiving a signal.
NOTE: 1. The test alarm beep will last only for
a few seconds.
2. When receiving a message, the alarm beep will
last for 5 minutes. You can turn off the beep
by pressing the <Alert On/Off> button of the
base unit after 10 seconds.
3. The base unit must be in <VOICE> or <SIREN>
mode in order for the modules to receive a signal
and set off the alarm beep.
To Next Page
Loading...
