2 | 11
Troubleshooting for Users
1 ABOUT TROUBLESHOOTING DOCUMENT
Before trying to maintain or troubleshoot the charging station you
should carefully read the instructions below to become familiar with
the charger, its elements and to prevent any injuries to the charging
station and yourself during the troubleshooting process.
Document will provide you the description of most common
problems that can happen and potential solutions that can be done
without the need to send the charging station back to the service
company.
2 CHARGING STATION PARTS
ACCESSORIES NEEDED
To access the maintenance doors you will need some accessories.
Depending on the type of door you will either need key, which was
send with the charging station, to unlock the lock or hex screw
driver if the doors don't have the lock, just the normal hex screw
(2.5mm).
Figure 1: Maintenance doors with hex screw
To Next Page
Loading...
