Etrel INCH Quick User Manual

str. 1
ETREL INCH
QUICK USER MANUAL
Figure 2: Etrel INCH with socket
1. LCD screen
4. Confirmation button
2. Status light
5. Socket
3. Settings button
6. Maintenance doors
ETREL INCH DESCRIPTION
Etrel INCH is a smart charging station that can predict your EV charging habits and
help you charge the car by the time you need it, at the lowest possible cost.
Charging station comes with the LCD screen that guides you through the charging
process and provides important charging information.
QUICK GUIDE
Step 1: WAKE - touch the screen.
Step 2: AUTHORISE - swipe the RFID card below the LCD touch screen.
Step 4: CONNECT THE CABLE – plug in charging cable into the socket and car
Step 5: STOP CHARGING – end the charging session directly in your car
Step 6: AUTHORISE - swipe the RFID card below the LCD touch screen.
Step 7: DISCONNECT THE CABLE – plug out charging cable from the socket.

Etrel INCH Specifications

General

Housing Material	Aluminum
Operating Temperature	-30°C to +50°C
Efficiency	>95%
Cooling	Natural convection
Connectivity	Ethernet, Wi-Fi, 4G (optional)
Compatibility	Electric vehicles with Type 2 connector
Charging Standard	IEC 61851, IEC 62196
Rated Current	32 A
Rated Voltage	400 V AC
Maximum Output Power	22 kW
Communication Interface	OCPP 1.6
Protection Degree	IP54
Mounting Type	Wall-mounted