EUCHNER MGB-L1 AP Series - 19 Declaration of Conformity

48 pages

To Next Page

To Previous Page

2119167-06-10/20 (Translation of the original operating instructions)

Operating Instructions Safety Systems

MGB-L1…-AR.-… / MGB-L2…-AR.-… and MGB-L1…-AP.-… / MGB-L2…-AP.-…

19. Declaration of conformity

Main Page

Default Chapter2
- Table of Contents2
1 About this Document4
- Scope4
  - Notes on Older Product Versions4
- Target Group4
- Key to Symbols4
- Supplementary Documents5
2 Correct Use6
- Main Differences between MGB-AP and MGB-AR7
3 Description of the Safety Function8
4 Exclusion of Liability and Warranty9
5 General Safety Precautions9
6 Function10
- Guard Locking for Version MGB-L110
- Guard Locking for Version MGB-L211
7 System Overview12
- Locking Module MGB-L12
- Handle Module MGB-H12
- Escape Release MGB-E12
- Dimension Drawing13
8 Manual Release14
- Auxiliary Release14
- Emergency Release (Can be Retrofitted)15
  - Actuating Emergency Release15
- Lockout Mechanism15
- Escape Release (Optional)16
  - Preparing Escape Release16
9 Mounting18
- Mounting Lens19
10 Changing Actuating Direction (Here: from Right to Left)21
11 Protection against Environmental Effects22
12 Electrical Connection23
- Notes about24
- Safety in Case of Faults24
- Fuse Protection for Power Supply24
- Requirements for Connecting Cables25
- Notes on Cable Laying25
- Changing Device Configuration (Using DIP Switches)26
- Notes on Operation with Control Systems28
- Connection of Guard Locking Control29
- Terminal Assignment and Contact Description30
- Operation as Separate Device31
- Operation in an AR Switch Chain32
- Information on Operation in an AR Switch Chain33
13 Setup34
- Teach-In Operation (Only for MGB Unicode)34
- Mechanical Function Test34
- Electrical Function Test35
14 Technical Data36
- Radio Frequency Approvals (for Devices with FCC ID and IC on the Type Label)37
- Typical System Times38
15 System States38
- Key to Symbols38
- System Status Table MGB-AR39
- System Status Table MGB-AP40
16 Troubleshooting and Assistance41
- Resetting Errors41
- Troubleshooting Help on the Internet41
- Mounting Help on the Internet41
- Application Examples41
17 Service41
18 Inspection and Service42
19 Declaration of Conformity43

EUCHNER MGB-L1 AP Series - 19 Declaration of Conformity

Table of Contents

Related product manuals