16
7. MAINTENANCE AND CARE
8. NOTES REGARDING ENVIRONMENTAL PROTECTION
Before cleaning, disconnect the connecting cable from the camera. Clean the housing with a soft, dry cloth.
Do not use any aggressive cleaning agents or solvent-based cleaners. Never allow liquids to ingress into the
housing.
When not in use, store the dashboard camera in a dry place. Do not expose the camera to large temperature
uctuations. The condensation that occurs as a result may, under certain circumstances, damage the device.
Do not dispose of electrical devices with the household waste! Electrical and electronic scrap must
be collected separately and disposed of in an environmentally responsible manner for recycling.
Please contact your community or city administration regarding disposal options for electrical and
electronic scrap.
9. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
The lens of the camera is dirty Carefully clean the lens
Strong light is acting directly on the
lens of the camera
As soon as the strong light dissipates,
the image quality will be OK
Incorrect light frequency set Set the appropriate light frequency
for articial light (Light frequency in
section 6.5 Functions)
The monitor does not show a
clean image