05
English English
06
STEP 1 POWERING ON THE WI-FI
DOORBELL CHIME
Connect the Wi-Fi Doorbell Chime to the Internet
1. Fix the power connector to Wi-Fi Doorbell Chime.
①
Place the power connector over Wi-Fi Doorbell Chime in the direction the
arrows indicate.
②
Align the raised slots of the power connector with the notch on the base of
the doorbell chime.
③
Rotate clockwise to lock the power connector in place.
1
2 3
2. Extend Wi-Fi Doorbell Chime’s antennas.
3. Plug Wi-Fi Doorbell Chime into an AC power supply at your desired location. The
LED indicator turns solid green when the doorbell chime is ready for setup.
To Next Page
Loading...
Need help?
General
