7 8
Step 5
Determine the mounting position of the doorbell. Consider the below factors:
1. Check if you can reuse the existing holes and anchors on the wall or door frame.
2. If you are drilling the mounting holes for the first time the recommended mounting
height is 48" from the ground.
If you are mounting the doorbell on a wooden wall or board, do NOT drill holes. Skip to
Step7 and use screws directly to mount the Mounting Bracket.
If your wall is stucco, brick or concrete, you need to drill holes. Use the Screw Hole
Positioning-Card to mark the position and drill holes with 1/4" (6.35mm) drill bit.
What are required: Power Drill with 1/4" (6.35mm) Drill Bit / Screw Hole Positioning-Card
Optional: Use the 15° mounting wedge as a supplementary mounting bracket if you wish
to see more on a specific side.
Step 6
Use the anchors provided when installing in materials such as stucco, brick, or concrete.
There is no need to use anchor If you were installing on wooden doorframe.
What's required: Anchors
To Next Page
Loading...
