11 12
Step 9
There are 2 thermal conductive pads on the mounting bracket. They're used to conduct
heat from video doorbell to the metal bracket. Remove the films on the thermal conductive
pads before you mount the doorbell.
Align the doorbell on the bottom, and then move it into place on top. Press the doorbell
down until it clicks.
Use the doorbell detaching pin provided if you wish to detach the doorbell from the
mounting bracket.
The detaching pin has magnet pad on the black-color side. Stick it on iron surface where
you can find it easily.
Note: The oval holes are speaker holes. Only press the round hole to detach the doorbell.
What's required: Doorbell detaching pin
To Next Page
Loading...
