1. Align the mounting plate with the cot mount, and slide the mounting plate onto the cot mount, matching the direction as
UP indicates.
2. Slide the camera onto the mounting plate and make sure it is attached securely.
3. Loosen the screw to adjust the width, install the cot mount to the crib, and tighten the screw to secure the installation.
Option 2 With Cot Mount and Gooseneck Arm
1. Align the mounting plate with the cot mount, and slide the mounting plate onto the cot mount, matching the direction as
UP indicates.
2. Slide the camera onto the mounting plate and make sure it is attached securely.
3. Align the two ends of the gooseneck arm with the screw holes on the cot mount and on the mounting plate respectively,
and screw down to secure the connection.
To Next Page
Loading...
