06
English
Prepare Door for Installation
1. Make sure that the following criteria are met so that the Smart Lock Wi-Fi can be
installed properly:
①
Check the door status. Make sure the doorframe is aligned with the door.
②
There are no obstructions stuck in the doorframe.
③
Leave enough space for the deadbolt to extend into the doorframe when the
door is locked.
2. ,-#$./0)12/3))2/4/52'6#/3%6#*+%)*+/()/6'.#/+12#/(-'(/(-#0/&(/(-#/5)77)8%*9/
measurements:
• The cross bore diameter (2
'' / 54 mm or 1½'' / 38 mm)
• Backset (2
'' / 60 mm or 2¾'' / 70 mm)
• Diameter of the door hole (1'' / 25 mm)
• Door thickness (1
'' / 35 mm - 2 '' / 55 mm)
or
Cross bore
diameter
2 !" or 54mm
Cross bore
diameter
1 ½" or 38 mm
Backset
2#" / 60 mm or
2¾" / 70 mm
Door hole
diameter
1" or 25 mm
1#" / 35 mm -
2 !" / 55 mm
Door thickness
To Next Page
Loading...
