Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
5
How to assemble your vacuum cleaner
1
5
2
6 7 8
3 4
Slide handle onto vacuum
back and push down until
it snaps.
Slip crevice tool inside extension wand;
store in holder on side of vacuum.
Install hose: Align tabs and
push down; twist clockwise
to lock.
Store dusting brush on
back of vacuum.
Snap turbo nozzle into holder
on front of handle.
Place dust cup on base and
snap into place.
Loop hose over carry handle and
secure into clip at side.
Secure loose end of hose over
hose hook.