Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
8
How to use your vacuum cleaner
• Pull out cord to desired length (Fig.
1). Do not pull past red line. Press
button to rewind cord.
• Plug power cord into outlet.
• To vacuum floors, turn air path knob
to ‘FLOORS’ (Fig. 2).
• Turn knob to adjust height for bare
floor and Low to High pile carpet
(Fig. 3).
• Some models: Adjust brush roll
on/off pedal. Step on pedal to turn
brush roll on for carpet or off for bare
floors (Fig. 4).
• Step on power switch to turn on.
Step on again to turn off (Fig. 5).
• Step on handle release to lower
handle into position (Fig. 6).
Empty dust cup after every use
• Lift latch and pull out dust cup (Fig.
7).
• To empty debris, press lever to
release bottom lid (Fig. 8).
21
4
5
3
6
7 8
To Next Page
Loading...
Need help?
General
