Eureka AS5200 Series User Manual

2
Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com
How to identify parts of vacuum cleaner
HEPA filter HF16
Filter cover
Cyclone
assembly
Brush roll
Cord retainer
Carpet height selector
Brush roll cover
(on some models)
Power switch
Crevice tool
Dust cup release button
Dusting brush
Air path selector knob
Lower cord wrap
Upper cord wrap
Handle
Maintenance information
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts! Assemble the vacuum cleaner before using.
Hose with wand
U belt
Cyclone
Cover
Screen
Collar
Stair and upholstery brush
(on some models)
Washable dust cup filters
Power cord
HEPA filter HF16
Washable filters
Wash screen
Never use vacuum without all filters in place.
BRUSH ROLL
Clean monthly
U BELT – Replace worn,
cut or out of shape belt
Press button
to release bottom lid.
Debris will empty.
Close bottom lid
until it clicks.
Clean as needed to maintain suction
Empty dust cup after each use
Replace within 6 months
Lift latch to open cover.
Remove foam filter
from filter frame.
Rinse and dry
THOROUGHLY.
Twist to unlock
cyclone assembly
from cup.
Twist and remove
collar to release
screen from cyclone.
Rinse screen and dry
THOROUGHLY;
reassemble.
Reinstal filters.
Close cover
until it clicks.
Remove dust cup.
Replace HEPA filter
and cover. Turn to lock.
Snap dust cup
into place.
Twist HEPA cover
and lift off.
Handle release

Eureka AS5200 Series Specifications

General

Brand	Eureka
Model	AS5200 Series
Category	Vacuum Cleaner
Language	English