Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com
4
How to maintain your vacuum cleaner
How to clear a blockage
Hose blockage
• Pull handle to release hose (Fig. 1).
• Grasp hose collar and twist to unlock.
Remove hose from vacuum body (Fig. 2).
Flexing the hose will loosen blockage.
• Squeeze and pull cover off air path selector
knob (Fig. 3).
• Pull out air path selector knob (Fig. 4).
• Use fingers to clear blockage from hose
and valve assembly (Fig. 5).
• Reinsert air path selector knob. Snap on
cover (Fig. 3).
• To reinstall hose, align tabs with notches
and set into base (Fig. 6). Twist collar to
lock (Fig. 2). Reinsert wand fully into hose;
snap into clip at top (Fig.1).
Clean brush roll
Turn vacuum face down on floor. Use scissors
to remove hair and threads from brush roll
(Fig. 7).
Fig. 2
Fig. 1
Fig. 4
Fig. 5
Fig. 3
Fig. 7
Fig. 6
C A U T I O N
Make sure vacuum cleaner is
turned off and power cord is
unplugged.
To Next Page
Loading...
Need help?
General
