Eureka E51 BASE - GENERAL WARNINGS AND ADVICE; DANGER SIGNS - ATTENTION

4
TABLE OF CONTENTS
Topic
PAGE
INTRODUCTION
5
MACHINE IDENTIFICATION
5
WARNINGS
6
GENERAL WARNINGS AND RECOMMENDATIONS
6
DISPOSAL
9
TRANSPORT AND MOVEMENT
9
UNPACKING
10
LIFTING THE TANK
11
BATTERIES INSTALLATION
12
MACHINE DESCRIPTION
13
PRIMARY FUNCTIONS AND CONTROLS
14
MACHINE SETTING
16
 MOUNTING THE SQUEEGEE
16
 ADJUSTING THE SQUEEGEE
16
 MOUNTING THE ABRASIVE DISC ONTO THE DISC PAD HOLDER
17
 BRUSHES/ABRASIVE DISC INSTALLATION
17
 FILLING THE DETERGENT SOLUTION TANK
18
 ADJUSTING THE DETERGENT SOLUTION ON THE BRUSHES
18
USING THE MACHINE
19
 CHECK BEFORE USE
19
 OPERATION
19
PERIODIC SERVICING
20
 DRAINING AND CLEANING THE RECOVERY TANK
20
 DRAINING AND CLEANING THE SOLUTION TANK
21
 CHECHING BRUSHES OR ABRASIVE DISCS
22
 CHECKING THE BRUSH PLATE SPLASHGUARD
22
 CLEANING, REPLACING AND CHECKING THE INSTALLATION OF THE SQUEEGEE BLADES
22
 CHECKING OR REPLACING FUSES IN THE ELECTRIC PANEL
25
 CHECKING OR REPLACING FUSES IN THE INSTRUMENT PANEL
26
 CHECKING THE SEAL ON THE COVER
26
 RECHARCING BATTERIES
27
DIMENSIONAL TECHNICAL DRAWINGS
28
TECHNICAL CHART
28
RECOMMENDED SPARE PARTS
29
COUPONS
31
TROUBLE-SHOOTING CHART
35
PRODUCT WARRANTY
36
INSTALLATION FORM FOR WARRANTY APPROVAL
37
DECLARATION OF CONFORMITY
38
DATE OF THE LAST UPDATE: 15/02/2017