Eureka E 46 B User Manual (English)

Questions and Answers:

R
Robert GrantAug 9, 2025
What to do if the brush motor does not work on my battery-powered Eureka Floor Machine?
- S
  Scott DayAug 9, 2025
  If your Eureka Floor Machine's brush motor isn't working and it's battery-powered, it could be due to several reasons. First, check if the batteries are low or exhausted and recharge or replace them. If that's not the issue, the RESET button might have been triggered, so try pressing it. Lastly, a blown fuse could also be the cause, in which case you should replace it.
M
Michael HernandezAug 14, 2025
What to do if the brush motor does not work on my AC-powered Eureka Floor Machine?
- D
  Derek BakerAug 15, 2025
  If your Eureka Floor Machine's brush motor isn't working and it's AC-powered, it might be because the RESET button went off, so try pressing it. Another possibility is that the fuse is blown, and you'll need to replace it.
R
renee90Aug 20, 2025
What to do if the squeegee on my Eureka E 46 B Floor Machine does not suck dirt?
- J
  Jacqueline HendersonAug 21, 2025
  If the squeegee on your Eureka Floor Machine isn't sucking up dirt, it could be due to a clogged vacuum hose. Try cleaning the pipe. Alternatively, the vacuum hose might be perforated, requiring you to change the pipe.
M
Mary GrahamAug 27, 2025
How to fix no cleaning solution flowing out of my Eureka E 46 B?
- R
  Roy Snow PhDAug 27, 2025
  If no cleaning solution is flowing out of your Eureka Floor Machine, there are several potential causes. The solution-carrying pipes might be clogged, so remove any obstructions. The filters could also be clogged, requiring you to clean or replace them. Ensure the solution tank isn't empty by filling it. Finally, check if the regulation tap has been closed and open it.
S
Sabrina PerezSep 2, 2025
Why does the squeegee leave dirt remains on my Eureka E 46 B?
- C
  Cindy SantosSep 2, 2025
  If the squeegee on your Eureka Floor Machine is leaving dirt behind, it could be because the edge of the rubber blade scraping the floor is worn out, meaning you should replace the rubber blades. Another reason might be that the squeegee is not perfectly adjusted in its inclination or pressure, so adjust the squeegee.