To Next PageTo Next Page
Need help?Do you have a question about the Eureka E51 BASE and is the answer not in the manual?
General| Brand | Eureka |
|---|---|
| Model | E51 BASE |
| Category | Floor Machine |
| Language | English |
Details on machine and manufacturer identification plates.
Highlights operations representing potentially hazardous situations for the operator.
Essential steps for storing the machine for long periods to prevent damage.
Procedures for disposing of spent oils correctly.
Guidelines for disposing of dead lead batteries as toxic waste.
Instructions for safely transporting the machine, including pallet fixing.
Advice for moving the machine between locations, including securing it.
Explanation of the control panel layout and functions.
Instructions on how to use the parking and emergency brake pedal.
Explains warning symbols and operates fan/brush switches.
Describes ignition sequence, fan/brush buttons.
Shows drive alarms and detailed battery charge levels.
Describes ignition sequence and brush release button.
Shows drive alarms and detailed battery charge levels.
Functions for brush, emergency stop, speed, and ECO-SYSTEM.
Step-by-step instructions for attaching the squeegee to the machine.
Guidance on adjusting squeegee inclination and pressure for optimal cleaning.
Steps to mount brushes or abrasive discs onto the machine.
Instructions for mounting discs/brushes for specific versions.
Procedures for filling the detergent solution tank with water and detergent.
Essential checks to perform before operating the machine.
Step-by-step guide for operating the machine.
Detailed steps for draining and cleaning the recovery tank.
Procedures for cleaning the ECO-SYSTEM filter and cycle.
Steps to drain and clean the detergent solution tank.
How to check the condition of brushes and abrasive discs.
Instructions for cleaning the filter for the detergent solution.
How to clean the pump output pipe fitting.
Steps to clean the squeegee and its blades.
Information on how to replace squeegee blades.
Procedures for rotating or replacing the rear squeegee blade.
Procedures for replacing the front squeegee blade.
Instructions for cleaning the machine's suction filter.
Steps for checking and replacing fuses for brush and suction motors.
Instructions for checking/replacing fuses in the front switchboard.
How to check and replace fuses within the instrument panel.
Guidance on checking and maintaining the recovery tank cover seal.
