Eureka E51 BASE - RECOMMENDED SPARE PARTS USED FOR SERVICING

38
RECOMMENDED SPARE PARTS USED FOR SERVICING. SERVICING OPERATIONS
CAN BE CARRIED OUT BY THE USER HIMSELF ON CONDITON IT HAS PREVIOUSLY
BEEN INSTRUCTED BY EITHER THE MACHINE OWNER OR HIS EMPLOYER
 COD. 330142: BUMPER DISC
 COD. 340104: LID GASKET MT. 1,82
 COD. 360346: SQUEEGEE REAR RUBBER IN LYNATEX (5mm)
(STANDARD FOR VERSIONS V2 - TRAC; V3 – ECO)
 COD. 360349: SQUEEGEE FRONT RUBBER IN LYNATEX (STANDARD)
 COD. 360348: SQUEEGEE REAR RUBBER POLYURETHANE (OIL- RESISTANT)
 COD. 360347: SQUEEGEE FRONT RUBBER IN POLYURETHANE (OIL-RESISTANT)
 COD. 360374: SQUEEGEE REAR RUBBER IN LYNATEX (3mm)
(STANDARD FOR VERSIONS V1 – BASE)
 COD. 520077: PPL BRUSH - 0,9 mm (1 FOR EACH MACHINE)
 COD. 520078: TYNEX BRUSH - 1,2 mm (1 FOR EACH MACHINE)
 COD. 520079: PAD WITH DISC LOCK (1 FOR EACH MACHINE)
 COD. 520080: PPL BRUSH - 0,6 mm (2 FOR EACH MACHINE)
 COD. 520081: TYNEX BRUSH - 1,2 mm (2 FOR EACH MACHINE)
 COD. 520082: PAD WITH DISC LOCK (2 FOR EACH MACHINE)
 COD. 520084: DISC LOCK
 COD. 900617: CARTRIDGE SUCTION FILTER - CLASS M (exUSGC)
 COD. 900622: SELF-LEVELLING SPLASHGUARD
 COD. 900634: SELF-LEVELLING SPLASHGUARD
 COD. TE.24984: RED ABRASIVE DISC - 20” 510mm
 COD. TE.26195: WHITE ABRASIVE DISC - 20” 510mm
 COD. TE.27127: RED ABRASIVE DISC - 12” 305mm
 COD. TE.28508: BLUE ABRASIVE DISC - 20” 510mm
 COD. TE.38162: BLACK ABRASIVE DISC - 12” 305mm
 COD. TE.51421: BLACK ABRASIVE DISC - 20” 510mm
 COD. TE.79746: WHITE ABRASIVE DISC - 12” 305mm
 COD. TE.96416: BLUE ABRASIVE DISC - 12” 305mm