To Next PageTo Next Page
Need help?Do you have a question about the Euro-Pro SHARK CW240 and is the answer not in the manual?
Form for registering product ownership to validate the limited warranty and enable safety notifications.
Diagnosing and resolving issues when the vacuum cleaner fails to turn on or function.
Troubleshooting steps for common causes of reduced suction power in the vacuum cleaner.
Addressing problems with turbo brushes not rotating or rotating slowly during operation.
Instructions for draining, cleaning the water tank and filters for optimal vacuum performance.
Guidance on adjusting the floor to carpet attachment for different surfaces and usage.
Explanation of the motor's protective thermostat and its function during overheating.
Details on how to properly store the vacuum cleaner's power cord.
Identification and description of the main parts and components of the vacuum cleaner.
Key technical details including voltage, power, and amperage for the vacuum cleaner.
Step-by-step guide for attaching the base casters to the vacuum cleaner unit.
Instructions on how to operate the vacuum for both dry and wet pick-up modes.
Guide on attaching and using the specialized air driven turbo brushes for effective cleaning.
Procedure for cleaning the compact air driven turbo brush to maintain its performance.
The Shark Bagless Water Filtration Vacuum Cleaner, Model CW240, is a versatile household appliance designed for both dry and wet pick-up, utilizing an innovative water filtration system to trap dust and debris. This vacuum is engineered for ease of use and effective cleaning across various surfaces, from carpets to hard floors.
The primary function of the Shark CW240 is to clean household surfaces by drawing in air, dust, and debris, which are then filtered through a water tank. This water filtration system is highly effective at trapping fine particles and allergens, preventing them from recirculating into the air, a common issue with traditional bag-based vacuums. The vacuum is equipped with a powerful motor that generates strong suction, making it suitable for a wide range of cleaning tasks.
For dry vacuuming, the unit efficiently picks up dirt, dust, and pet hair from carpets and hard floors. The water tank acts as the primary filter, eliminating the need for disposable bags and ensuring that exhaust air is cleaner.
Beyond dry cleaning, the CW240 also functions as a wet pick-up vacuum. This feature allows users to clean up liquid spills from surfaces, making it a multi-purpose tool for various household accidents. When used for wet pick-up, the water tank collects the liquids, providing a convenient and hygienic way to manage spills. It's important to note that the air-driven turbo brushes are not suitable for wet pick-up and should only be used for dry applications.
The vacuum includes a range of attachments designed to enhance its versatility. These include an upholstery brush for furniture, a crevice tool for tight spaces, a small round brush for delicate surfaces, and a floor-to-carpet brush for general floor cleaning. Additionally, it comes with a wet use brush specifically for liquid spills. For more intensive cleaning, the Deluxe Air Driven Turbo Brush and Compact Air Driven Turbo Brush provide enhanced agitation for carpets, effectively lifting embedded dirt and pet hair. These turbo brushes are powered by the vacuum's suction, causing their internal beater bars to rotate rapidly.
A speed control knob on the unit allows users to adjust the suction power, providing flexibility for different cleaning needs and surfaces. A manual variable suction control on the hand grip further allows for fine-tuning of suction, which can be particularly useful when cleaning delicate items or when less power is required.
Operating the Shark CW240 involves a few straightforward steps. Before use, the water tank must be filled with 6 to 8 cups of clean water, ensuring the water level is between the "Min" and "Max" indicators. The flexible hose is then attached to the suction hole, followed by the extension tubes and the desired cleaning accessory. The extension tubes connect securely to the hand grip and to each other with a simple twist-to-tighten mechanism.
Once assembled, the vacuum is plugged into an electrical outlet, and the "On/Off" switch is turned to the "On" position. The speed control knob can be adjusted to regulate suction. When using the floor-to-carpet attachment, the brushes can be set in an "Out" position for carpets or lifted to an "Up" position for hard floors.
For the air-driven turbo brushes, they are attached to the extension tube after ensuring the vacuum is off and unplugged. Once re-plugged and turned on, the beater bar on the turbo brush will begin to rotate. The Deluxe Air Driven Turbo Brush offers an adjustment for carpet nap, with a slide control on the brush housing to switch between high pile and low nap carpet settings.
The vacuum is designed with safety in mind. It features a grounded-type 3-wire cord and plug, which should only be used with a compatible 3-prong electrical outlet. It also includes a motor protective thermostat that automatically shuts off the unit if it overheats, preventing damage. If this occurs, the unit should be unplugged, turned off, and allowed to cool before restarting.
Regular maintenance is crucial for ensuring the optimal performance and longevity of the Shark CW240. The water tank should be emptied and cleaned after each use, or whenever the water level reaches the "Max" indicator. To do this, the unit must be unplugged, the water tank removed, and its contents disposed of into a toilet or outside drain. The tank should then be thoroughly washed with fresh tepid water, and a mild detergent can be used if needed. It is critical not to immerse the electrical part of the vacuum into water or any other liquid.
The foam inlet filter, located within the water tank assembly, and the exhaust filter require regular cleaning. These filters are washable and should be cleaned regularly, depending on the frequency and intensity of use. A severely soiled or clogged filter should be washed with fresh tepid water and mild detergent. After washing, the filters must be air-dried completely before being reinstalled. It is important not to use a washing machine or a hair dryer to dry the filters, and the vacuum should never be operated without the filters in place.
The air-driven turbo brushes also require periodic cleaning to maintain their effectiveness. The top housing of these brushes can be tilted upwards by sliding a locking latch, allowing access to the turbine wheel and rotating brush. Users should inspect for and remove any debris, blockages, or accumulated hair/string from the turbine and beater brush. Scissors can be used to carefully cut away tangled hair, taking care not to damage the bristles. After cleaning, the housing should be closed, and the locking latch secured.
The manual emphasizes the importance of replacing the foam inlet and exhaust filters every three months, or sooner depending on usage, to ensure peak performance.
For convenient storage, the power cord can be spooled around the top cover of the unit and the plug tucked under the lip. The casters, which come unassembled, are easily inserted into the base by pushing them down firmly.
The Shark CW240 is designed to be a durable and efficient cleaning tool, provided that the user adheres to the recommended usage and maintenance guidelines. Its water filtration system offers a distinct advantage for cleaner exhaust air, making it a suitable choice for households seeking a more hygienic cleaning experience.
General| Type | Canister |
|---|---|
| Power | 1200 Watts |
| Filtration | HEPA |
| Included Accessories | Crevice Tool, Dusting Brush |
| Filter Type | HEPA |
| Cord Type | Automatic cord rewind |
